ASSETS & FACILITIES

 

OVERVIEW OF OUR STRENGTHS

•16,000-deadweight tonne capacity ship handling

•24,000-tonne fabrication output per annum

•540-metre length wharfage

•200-tonne tested bollard pull testing facility

•7,000-tonne capacity Syncrolift shiplift system

•12,000 and 3,000-tonne capacity loadout skidway and quay

 

Ideally sited on 60 acres of land within the port of Victoria Harbour on Labuan Island, LSE operates in one of the most strategic locations in the Asia Pacific region as it is blessed with deep-water access, shelter from prevailing monsoons and boasts itself for being a free port status.

With a maximum capacity of 24,000 tonnes of fabrication output per annum, we are capable of undertaking multiple projects such as the construction of offshore platforms (over 2,000 tonnes each) or ocean-going ships without any bottleneck. The shipyard possesses loadout facilities comprising an efficient 7,000-tonne capacity Syncrolift shiplift system, and boasts two loadout skidways and quays. The yard also possesses approximately 540-metre length wharfage for ships.

LSE’S LATEST FACILITY THIS 2019

Bollard Pull Testing Facility

After a recent upgrade on our yard, LSE has once again accomplished another significant milestone by becoming the first shipyard in Borneo and East Malaysia to offer bollard pull testing services within the shipyard itself. We understand this is a highly sought-after value-added service for our clients as this testing is an important ship owner and classification requirement that they need in order to guarantee and demonstrate vessel optimum performance to their respective clients.

At LSE, our bollard pull testing facility has been tested to a maximum 200-tonne capacity. It is suitable for testing vessels with up to 12,000 engine horsepower. This is subject to other factors such as transmission losses, propulsion type and propulsion system efficiency. A report will be provided and used as verification of the vessel’s pulling (or towing) capability. Among the classification societies that witness our numerous bollard pull tests are ABS, DnV, BV, Lloyds and NK. We are proud to offer our clients assurance on quality when they perform their vessel’s bollard pull test with us, and convenience as we become a one-stop integrated solutions provider for all marine and oil & gas project needs.

Bollard Pull Test

For further enquiries on our bollard pull testing services or other services and facilities in LSE, please drop an email to our Business Development personnel at enquiry@labuanship.com and we shall get in touch with you soon.

 

LSE-Labuan Shipyard-Assets & Facilities-Thumbnail


At LSE, we have full control on a comprehensive range of facilities and equipment to cater to the various requirements of your project. This ensures that you are always provided with the most feasible, cost-effective and time-saving integrated solution possible.

GENERAL SHIPYARD SERVICES

Provided 24/7, all year long
24-hour access with gated security areaWarehousing & space rental
Video surveillance system at priority areasFresh water, power & scaffolding
Floodlit open and covered fabrication baysInternet access and office space rental
Dock & berth rentalTransporting of heavy loads
Public food court on siteCradle system & working platforms

 

WHARF & LOADOUT FACILITIES

DescriptionDimension
Inner Jetty140m (L)
Outer Jetty540m (L)
Shiprepair Jetty180m (L)
Loadout Quay No. 158m (L) x 3,000 MT
Loadout Quay No. 2153m (L) x 12,000 MT
Syncrolift Shiplift140m (L) x 28m (W) x 8.5m (D) x 7,000 MT
Side Transfer Area140m (L) x 156m (W)
Skidway No. 1188m (L) x 28m (W) x 12,000 MT
Skidway No. 2146m (L) x 20m (W) x 3,000 MT

 

BOLLARD PULL TESTING FACILITY

DescriptionCapacity
Maximum Test Pulling Load200 tonnes
Maximum Engine Horsepower12,000
Maximum Water Depth at Site12 metres

 

COVERED FABRICATION SPACE

DescriptionDimensionAreaCrane
Bay 125m x 200m6,250 m²Overhead cranes
10 MT x 2, 15 MT x 1
Bay 225m x 100m2,500 m²Overhead cranes
25 MT x 2
Bay 358m x 100m5,800 m²Overhead cranes
50 MT x 2
Bay 4 30m x 100m
x 2 floors
600 m²Overhead cranes
20 MT x 1, 10 MT x 1
Bay 5, 625m x 100m ea2,500 m² eaOverhead cranes
10 MT x 1
Bay 7, 825m x 100m ea2,500 m² eaOverhead cranes
10 MT x 2
Maintenance Workshop20m x 65m1,300 m²1 x 5 tons Semi-Portal Crane
Auto Blast Chamber130m x 14.4m2,000 m²Overhead crane capacity
12MT x 3

 

OPEN FABRICATION SPACE

DescriptionDimensionArea
Repair Berth No. 1250m x 30m7,500 m²
Repair Berth No. 2180m x 30m5,400 m²
Bay 2 Extension25m x 150m3,750 m²
Bay 3 Extension58m x 150m8,700 m²
Outfit Complex Extension30m x 150m4,500 m²
Open Fabrication Space Next to Open Stock Yard95m x 175m16,625 m²
Block Blasting Area30m x 100m3,000 m²

 

WAREHOUSE

DescriptionDimension AreaCrane/Facilities
Open Stock Yard25m x 230m5,750 m²1 unit 15 tons Gantry Crane
Main Warehouse15m x 80m3,600m²1 unit 1.5 tons Battery Operated Forklift
Project Store No. 124m x 43m1,032m²
Project Store No. 215m x 60m900m²
Project Store No. 315m x 60m 900m²

 

MAJOR EQUIPMENT

NoDecription
11 unit of CNC Fusion Plasma Underwater Cutting Machine
21 unit of Fuji 500 tons Press
31 unit of Roundo Plate Bending & Rolling PS 600
41 unit of 400 tons Hugh Smith Frame bender
51 unit of OTC Plasma D-12000

 

LIFTING EQUIPMENT

NoDescription
11 unit of 50 tons Dockside/Lifting Crane
22 units of 70 tons Grove Mobile Crane
31 unit of 250 tons Manitowoc M250 Crawler Crane
41 unit of 320 tons Manitowoc M4600 Ringer Crane
52 units if 15 tons Forklift
63 units of 7 tons Forklift
71 unit of 10 tons Side Forklift

 

ELECTRICAL AND AUXILIARY SUPPORT

NoDescription
1Welding sets consist of Miller MK VIII-2 DC (SMAW), Esab LCF1200-DC,RC500 (SMAW), Esab A2 Multiwoc 1000 Amps.(SAW), Miller Syncrowave 350 Amps.(GTAW) and many more
2Generators equipment consist of 1000 KVA Portable Cummins Diesel Generator G21, 1875 KVA Portable Caterpillar Diesel Generator G20 and many more
3Air compressors equipment consist of 750 CFM Air Compressor Ingersoll Rand (Model: HP750/Diesel Driven. Potable type), 674 CFM Air Compressor IR/Motor EP150/50. Fixed type. And many more
4Blasting and Painting equipment consist of Air Dryer 750 CFM. IR Model: DXR-750EE, Auto Blasting Machine 550 m²/day. and many more
5Transfer cradle equipment consist of Bilge Cradle (Long) 8 wheels and Keel Cradle (Short) 4 wheels

 

  • Warehouse
  • Hydraulic Press
  • Site Transfer Area
  • Plate Roller
  • Frame Bender
  • Autoblast Facilities
  • Caterpillar Loader
  • Volvo Wheel Loader
  • Lifting cranes
  • 10T Side forklift
  • Covered space area
  • Dry docking area
  • Synchrolift shiplift